After investing in a battery powered riding lawn mower, I needed to install another GFCI in the garage to charge it. There are 3 outlet boxes around the garage, but not one where I need one. Our beverage refrigerators have been on extension cords since we had one in the garage. I attributed the refrigerator…
-
-
DIY Project – Dishwasher Air Gap – Replacing the Air Gap I wanted to get the new air gap in place before we needed to run the dishwasher. We made, it seems, our weekly trip to the home improvement store. Efiwym, my wife, had her list of things to buy including an air gap. We…
-
Efiwym, my wife, noticed water puddling again by the back and side of the sink. My initial reaction was the hose was clogged again. I got some coaxial cable and tried to clear the blockage. The cable kept going down the dishwasher side of the hose. I tried several times to no avail. (I later…
-
I have installed 3 different dishwashers during the 35 plus years at our existing home. With all three installations, I never replaced the waste hose or the air gap. I only replaced the air gap cover from chrome to white. About 6 months ago I noticed water puddling outside our kitchen sink. Initially I thought,…
-
DIY Project – Kitchen Countertops – Installation – Finally Done With the disposal in place, I removed all the support wood that once were holding it up. I left off the dishwasher waste hose for now. I wanted to get the PVC waste pipes connected. That is where I hit a snag. The drains of…
-
I was ready to install the kitchen sink. I dropped the sink into the cutout. Not surprisingly, it fit. I had the ability to move the sink around to align it over the window. Once it was aligned, I put pencil marks on the countertop on the sides and front of the sink. I removed…
-
The next morning, I went around the kitchen and lifted on the three countertops to make sure they were glued in place. I gave a couple of lifts around the peninsula. Confident that the countertops were glued down, it was time for the sink installation. Since the sink was a clearance item, I did not…
-
Getting this 10-foot-long u-shaped countertop aligned on the cabinet was going to be a challenge. As a just okay DIYer, I do not like challenges. Nothing impacts my Zen more than a challenge. I like things to go smoothly and trouble free. I like saying things out loud, like “That was easy,” or “Yes!” not…
-
After a frustrating time getting the other mitered side of the countertops connected and aligned, it was time to work on the peninsula side of the countertop. I did not have the same amount of a cabinet opening as the other side, so I expected more aggravation. I was not disappointed. Using the same process…
-
I could now work on the countertops on the other side of the kitchen. I brought in from the garage the three pieces for the u-shaped countertop. The countertop included metal connectors to put the pieces together. There were 3 connectors per mitered edge. I laid the pieces on the cabinets in the places where…